The low-noise low-speed wind tunnel contains two test sections. Both sections have a cross-section of about 2.5 m wide and 2 m high and the test wind speed ranges from 15 m/s to 40 m/s. In aerodynamic test section, a mo…
View recordhe anechoic wind tunnel houses an open-jet inflow duct of 0.4m (W) by 0.4m(H), and an outlet that has a cross-section of 0.6m (W) by 0.6m (H). The test section is enclosed within an anechoic chamber that has dimensions …
View recordThis facility was designed and fabricated at HKUST, and it is used to evaluate prototype acoustic materials. Test samples are sandwiched tightly between two paralleled Plexi glass plates (2.4 m x 1.2 m x 0.02 m), which …
View recordWWTF's wind tunnel contains two test sections that are specifically designed for aerospace engineering and structural/environmental engineering. Both sections have a cross-section of about 2.5 m wide and 2 m high and th…
View recordThis device is used to characterise the impedance and transmission loss properties of materials, in the frequency range of 50Hz-6.4kHz. Material samples with a diameter of 29mm and 100mm can be evaluated in the frequenc…
View recordThe experimental test is conducted in the wind tunnel in combination with the test rig. The wind tunnel is exclusively designed for speed racing purpose with low turbulence intensity and steady dynamic pressure. The tes…
View record
